Adhesives
Cementitious
Colcret Flex is our most premium adhesive solution. Certified as C2TES2 according to UNE-EN 12004-1, this cementitious adhesive is designed to meet and exceed the most rigorous standards of adhesion, workability and flexibility. A product with the highest performance, designed for complex applications and demanding substrates.
ColCret Flex is a high-performance C2TES1 cementitious adhesive formulated with cement, selected aggregates, organic additives, and synthetic resins that improve workability, water retention, open time, and mortar adhesion. It is deformable, non-sagging, and allows for tile adjustments. It is especially suitable for laying porcelain stoneware and is designed for facades and large-format ceramics.
ColCret Porcelánico Plus cementitious adhesive is a high-performance C2TE cementitious adhesive with reduced slip and extended open time, for the installation of interior and exterior floor and wall coverings and exterior baseboards.
Specially recommended for laying a new pavement over an existing one, its application is optimal for all types of ceramic tiles, porcelain stoneware, granite, marble and natural stones.
ColCret Porcelánico Piscina is a cementitious adhesive C1TE of mixed binders with reduced slip and extended open time whose initial adhesion is excellent. It allows the adhesion of all types of ceramic tiles, porcelain stoneware, marble, granite and natural stone in interior and exterior flooring, interior cladding and exterior skirting boards.
Especially recommended for tiling of swimming pools with vitreous mosaic and tiling of gypsum plasterboard partitions (PYL type).
ColCret Interior/Exterior cementitious adhesive is a cementitious adhesive formulated with cement, selected aggregates, organic additives and synthetic resins that improve the workability, water retention, open time and adhesion of the mortar. It allows the rectification of pieces.
Colcret Interior cementitious adhesive is a conventional adhesive mortar formulated with white cement, mineral fillers of selected granulometry and special additives to improve the workability and adherence of the material.
Glass Cristal Colcret cementitious adhesive is an adhesive mortar formulated with high-strength white cement, selected fine aggregates, resins and special additives that give it adherence, plasticity, impermeability, excellent workability and easy cleaning. Specially indicated for the bonding of glass blocks in interior and exterior.
projects
Our Colcret adhesives are present in some of the most emblematic residential projects on the Mediterranean coast. Works that stand out for their design, quality and technical requirements.
Frequently Asked Questions about Cementitious Adhesives
How much mix do I need per m² ?
For a 60 × 60 cm tile with a 10 mm trowel, the average consumption is 3.5-4.5 kg of adhesive per m². The XXL format or irregular substrates increase the quantity.
Is it mandatory to prime the substrate?
Yes, a suitable primer prevents premature dehydration on very absorbent substrates (plaster, plasterboard) and improves adhesion on smooth surfaces such as old tiles.
Can I use it in extreme temperatures?
Always work between +5 °C and +35 °C. Below or above, setting slows down or accelerates and the bond may be compromised.
When is it possible to rejoin?
They incorporate water-repellent additives: they repel rain but allow the wall to breathe, preventing condensation.
Are Colcret adhesives suitable for underfloor heating?
Yes, Flex, Flex Premium and Interior & Exterior references are deformable and absorb system expansions.